YY 0285.1-2017: Translated English of Chinese Standard. YY0285.1-2017: Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements [Tips: BUY here & GET online-reading at GOOGLE. Then, if you need unprotected-PDF for offline-reading, WRITE to Wayne: Sales@ChineseStandard.net]
https://www.chinesestandard.net, 8. jan. 2018 - 32 sider
This part of YY 0285 specifies the general requirements for intravascular catheters of various uses with sterile supply and single-use. This part does not apply to intravascular catheter accessories, such as YY 0450.1.
Hva folk mener - Skriv en omtale
Vi har ikke funnet noen omtaler på noen av de vanlige stedene.
adapter additive Adjust applicable Assemble burst catheter hub Catheter identification clinically close coating cone configuration connection connector container Corrosion defects deionized water Descriptions diameter distal end distilled water document effective length example Figure flow rate fluid following information French French unit GB/T given in Appendix Glass greater head hydratable intravascular catheters hydration catheter include the following inner inserted instrument junction keep leak leakage least less liquid Locking Luer manufacturers mark maximum measured Medical Device meet this requirement method given needle nominal normal vision Normative Note operating instructions outer surface peak tension Power injection pre-hydration and post-hydration pressure primary packaging Principle provisions proximal end record references report shall include report The test requirements saline sample scale secure separate simulated single-use Specifications standard Steps Sterile syringe temperature test catheter test method Test report test section tested in accordance viscosity volume YY/T