The Goulds M'f'g. Co's. Illustrated ...: Catalogue and Price List, of Pumps, Engines ...Goulds Mfg. Company, 1888 - 288 sider |
Andre utgaver - Vis alle
The Goulds M'F'g. Co's. Illustrated ...: Catalogue and Price List, of Pumps ... Inc Goulds Pumps Ingen forhåndsvisning tilgjengelig - 2018 |
The Goulds M'F'g. Co's. Illustrated ...: Catalogue and Price List, of Pumps ... Inc Goulds Pumps Ingen forhåndsvisning tilgjengelig - 2015 |
Vanlige uttrykk og setninger
2½ inch 34 inch hose adapted anti-freezing arranged Balance Wheel barrel base bolted bottom BRASS CYL check valve Cipher cock crank shaft cut represents cut shows Deep Well Pump diameter double Double-Acting Force Pump elbow Engine face plate feet fitted for wrought-iron flange fly wheel Foot Valve FORCE PUMP STANDARD frame furnish gas pipe GOULDS PUMP GOULDS SUCTION guides Hand Boiler Hand Force Pump heavy Height Horse Gear hose tube House Force Pumps inch pipe inch stroke IRON CYLS iron pipe lead pipe Length lever loose pulleys MANUFACTURING operation plank Plunger Poppet Valves Power Rotary Force PUMP CYLINDER quantity of water Rams REVOLVING TOP ROTARY FORCE PUMP Rotary Pump screw SENECA FALLS Single-Acting spout steam Street Washer stuffing box style of Pump SUCTION AND FORCE suction hose suction pipe tight and loose unless otherwise ordered Wind Mill WIND POWER wrought-iron pipe ΙΟ
Populære avsnitt
Side 197 - To find the pressure in pounds per square inch of a column of water, multiply the height of the column in feet by .434. Approximately we say that every foot elevation is equal to % pound pressure per square inch; this allows for ordinary friction. To find the diameter of a pump cylinder...
Side 197 - To find the diameter of a pump cylinder to move a given quantity of water per minute (100 feet of piston being the standard of speed), divide the number of gallons by 4, then extract the square root, and the product will be the diameter in inches of the pump cylinder. To find the quantity of water elevated in one minute...
Side 197 - Capacity of a five-inch cylinder is desired; the square of the diameter (5 inches) is 25, which, multiplied by 4, gives 100, which is gallons per minute (approximately). To find the diameter of a pump cylinder to...
Side 6 - A horse-power being the power required to lift 33,000 pounds one foot in one minute...
Side 197 - The mean pressure of the atmosphere is usually estimated at 14.7 pounds per square inch, so that with a perfect vacuum it will sustain a column of mercury 29.9 inches or a column of water 33.9 feet high at sea level. To find the pressure in pounds per square inch of a column of water, multiply the height of the column in feet by .434.
Side 197 - The area of the steam piston, multiplied by the steam pressure, gives the total amount of pressure that can be exerted. The area of the water piston, multiplied by the pressure of water per square inch, gives the resistance. A margin must be made between, the power and the resistance to move the piston at the required speed — say from 20 to 40 per cent., according to speed and other conditions.
Side 197 - To find the capacity of a cylinder in gallons. Multiplying the area in inches by the length of stroke in inches will give the total number of cubic inches ; divide this...
Side 197 - To find quantity of water elevated in one minute running at 100 feet of piston speed per minute. Square the diameter of the water cylinder in inches and multiply by 4. Example: capacity of a 5 inch cylinder is desired.
Side 197 - ... by the height in feet and divide the product by 33,000 (an allowance of 25 per cent, should be added for water friction, and a further allowance of 25 per cent, for loss in steam cylinder).
Side 141 - ... greater elevation and distance is correspondingly strengthened. The relative height of the spring or source of supply above the ram, and the elevation to which it is required to raise, determine the relative proportion between the water raised and wasted, the quantity raised varying according to the height it is conveyed with a given fall; also, the distance the water has to be conducted, and consequent length of pipes, have some influence on the quantity delivered at the point of discharge,...