 | 1854 - 628 sider
...deducting the average thickness of the ceiling which is between the bilge planks and limber strake; then, if the depth at the midship division of the...four equal parts; then measure the inside horizontal breadih at each of the three points of division, and also at the upper and lower points of the depth,... | |
 | Great Britain - 1854 - 378 sider
...deducting the average Thickness of the Ceiling which is between the Bilge Planks and Limber Strake ; then, if the Depth at the Midship Division of the...and also at the upper and lower Points of the Depth, ex tending each Measurement to the average Thickness of that Part of the Ceiling which is between the... | |
 | Great Britain - 1854 - 1036 sider
...deducting the average Thickness of the Ceiling which is between the Bilge Planks and Limber Strake ; then, if the Depth at the Midship Division of the Length do not exceed Sixteen Feet, Measurement of Ttwxagt. Comput.iticn from A run. Poop and any other closed-in Space. Feet, divide each... | |
 | Canada - 1854 - 556 sider
...Six equal Parts instead of Four, and measure as before directed the horizontal Breadths at the Five Points of Division, and also at the upper and lower Points of the Depth; number them from a hove as before; multiply the Second, Fourth, and Sixth by Four, nnd the Third and... | |
 | Canada - 1854 - 560 sider
...Six equal Parts instead of Four, and measure as before directed the horizontal Breadths at the Five Points of Division, and also at the upper and lower Points of the Depth; number them from above as before; multiply the Second, Fourth, and Sixth by Four, and the Third and... | |
 | Charles Abbott (Baron Tenterden) - 1854 - 222 sider
...six equal parts instead of four, and measure as before directed the horizontal breadths at the five points of division, and also at the upper and lower points of the depth ; number them from above as before ; multiply the second, fourth, and sixth by four, and the third... | |
 | Austria - 1878 - 838 sider
...deducting the average thickness of the ceiling which is between 1873 the bilge planks and limber strake ; then if the depth at the midship division of the length...horizontal breadth at each of the three points of division, aud also at the upper and lower points of the depth, extending each measurement to the average thickness... | |
 | Richard Henry Dana - 1856 - 460 sider
...six equal parts instead of four, and measure, as before directed, the horizontal breadths at the five points of division, and also at the upper and lower points of the depth, number them from above as before ; multiply the second, fourth, and sixth by four, and the third and... | |
 | Perry Fairfax Nursey - 1856 - 634 sider
...points (including the extremities) the depth is measured fro.n one point to another, duly defined, and if the depth at the midship division of the length do not exceed 16 feet it is divided into 4 equal parts; if it exceed 16 feet, then it u divided into 6. The breadths... | |
 | 1856 - 650 sider
...points (including the extremities) the depth is measured from one point to another, duly denned, and if the depth at the midship division of the length do not exceed 16 feet it is divided into 4 equal parts; if it exceed 16 feet, then it is divided into 6. The breadths... | |
| |
... points of division, and also at the upper and lower points of the depth... 
