## Modern Sheet-metal Workers' Instructor: Practical Geometry, Mensuration, Properties of Metals and Alloys ... |

### Inni boken

Resultat 1-5 av 18

Side 33

Multiply the length by the

from the result. To find the circumference of a flat-oval. The circumference of a flat

-oval is equal to twice its length plus 1.142 times its

— ...

Multiply the length by the

**width**and subtract .214 times the square of the**width**from the result. To find the circumference of a flat-oval. The circumference of a flat

-oval is equal to twice its length plus 1.142 times its

**width**. Flat-oval: Area = D (H— ...

Side 34

Multiply the length by the

circumference of a rectangle. The circumference of a rectangle is equal to twice

the sum of the length and

...

Multiply the length by the

**width**, the result is the area of the rectangle. To find thecircumference of a rectangle. The circumference of a rectangle is equal to twice

the sum of the length and

**width**. Rectangle : Area = DXH Circ. = 2 (D X H) To find...

Side 40

Multiplying together the length,

the rectangular solid. To find the superficial area of a rectangular solid. Multiply

the

height ...

Multiplying together the length,

**width**and height will give the cubic contents ofthe rectangular solid. To find the superficial area of a rectangular solid. Multiply

the

**width**by the sum of the height and length and add to it the product of theheight ...

Side 66

75 will turn locks from % to 1% inches in

joints or angles, turn narrow or wide locks, turn a round edge for wiring and form

these locks on medium plate with ease. They will also form open or close locks.

75 will turn locks from % to 1% inches in

**width**. These machines will form squarejoints or angles, turn narrow or wide locks, turn a round edge for wiring and form

these locks on medium plate with ease. They will also form open or close locks.

Side 99

113 are arranged with gauges for cutting sheet metal of any length into strips

from % inch to 18 inches in

at any point desired. To cut metal into strips longer than 30 inches, the gauges at

the ...

113 are arranged with gauges for cutting sheet metal of any length into strips

from % inch to 18 inches in

**width**. Sheet metal 30 inches wide may be cross cutat any point desired. To cut metal into strips longer than 30 inches, the gauges at

the ...

### Hva folk mener - Skriv en omtale

Vi har ikke funnet noen omtaler på noen av de vanlige stedene.

### Andre utgaver - Vis alle

Modern Sheet-Metal Workers' Instructor: Practical Geometry, Mensuration ... Joseph H Rose Ingen forhåndsvisning tilgjengelig - 2018 |

Modern Sheet-Metal Workers' Instructor: Practical Geometry, Mensuration ... Joseph H Rose Ingen forhåndsvisning tilgjengelig - 2018 |

Modern Sheet-Metal Workers' Instructor: Practical Geometry, Mensuration ... Joseph H. Rose Ingen forhåndsvisning tilgjengelig - 2017 |

### Vanlige uttrykk og setninger

alloys aluminium ammoniac annealed antimony bending bismuth body boiling borax bottom brass brazing cast iron chloride of zinc circle circumference clean coated copper copper-bit cubic contents curve cutter cylinder degrees Fahrenheit describe dipped dissolve draw lines draw the line drop hammer Ductility edge feet fire flux foot gallons galvanized gauge gills glue hammer hardened heat hole inches in diameter joint killed spirits lead length machine shown malleable melted molten Multiply muriatic acid nitric acid number of equal oxide pattern perpendicular piece pints pipe plates points pounds pressure radius right angles rolls rosin round salammoniac screw shape shears sheet metal shown in Fig side solder solid solution Specific gravity speculum metal spelter square inch stake steel straight line substance sulphuric sulphuric acid superficial area surface temperature thick thin tion triangle tube velocity vessel Weight width wire wrought-iron zinc

### Populære avsnitt

Side 5 - When a straight line standing on another straight line makes the adjacent angles equal to one another, each of the angles is called a right angle ; and the straight line which stands on the other is called a perpendicular to it.

Side 21 - AB of the circle into as many equal parts as the polygon is to have sides. With the points A and B as centers and radius AB, describe arcs cutting each other at C.

Side 224 - To find the pressure in pounds per square inch of a column of water, multiply the height of the column in feet by .434. Approximately, we say that every foot elevation is equal to % Ib. pressure per square inch ; this allows for ordinary friction. To find the diameter of a pump cylinder...

Side 227 - To find the velocity in feet per minute necessary to discharge a given volume of water in a given time, multiply the number of cubic feet of water by 144 and divide the product by the area of the pipe in inches.

Side 43 - To find the. area of a triangle when the three sides are given. From half the sum of the three sides...

Side 315 - Sold by booksellers generally or sent postpaid to any address upon receipt of price. FREDERICK J. DRAKE & CO., Publishers 350-352 Wabash Avenue, CHlCAGO, ILL, Easy Electrical Experiment* and How to Make Them By L.

Side 10 - A circle is a plane figure contained by one line, which is called the circumference, and is such, that all straight lines drawn from a certain point within the figure to the circumference are equal to one another : 16. And this point is called the centre of the circle.

Side 5 - A plane angle is the inclination of two lines to one another in a plane, which meet together, but are not in the same direction.

Side 5 - A straight line is that which lies evenly between its extreme points.

Side 15 - A cone is a solid figure described by the revolution of a right-angled triangle about one of the sides containing the right angle, which side remains fixed.